Produk 
The Tanto 6120 is a high-end, external-drum, 8-up imagesetter that lets you consistently get more jobs done in less time. It can handle media sizes up to 838 x 1,145 mm (33" x 45") and has six resolution settings between 1,200 dpi and 4,000 dpi. It can be used to image six different sizes of positive and negative films, as well as RC paper and polyester CTP plates. Its media handling system is second to none. It has an easy-to-use touchscreen interface and is supported by a range of workflow options including multiple internal punchblocks and an inline processor, as well as a range of high-powered RIPs.
The Tanto 6120's imaging speed is the key ingredient in a total recipe for high throughput. For a media size of 810 x 1,120 mm (31.8" x 44.1") at 2400 dpi without punching, it can comfortably output 20 flats per hour. Even when equipped with an automatic, internal punching option, it will still output 17 flats per hour of three-pin punched film in perfect register. To achieve this impressive speed, a high-power LED array simultaneously images a 120 channel-wide swath while the drum spins at up to 510 rpm. What's more, it can receive data at a full 16 MB/sec through its F-PIF (fast PIF) interface, which further enhances its throughput capabilities.
The Tanto 6120's maximum media size of 838 x 1,145 mm (33" x 45") supports 8-up output with plenty of room to spare, while the minimum media size of 610 x 830 mm (24" x 32.7") is suitable for A2 or 4-up output. It has six imaging resolutions, 1200, 2000, 2400, 3000, 3500*, and 4000 dpi, offering a full array of choices for output quality. The minimum spot size of 6.35 microns helps assure that images are recorded clearly and crisply even at the highest resolutions, while spot size variability helps optimize image quality at each resolution setting.
- Exposure system : External drum
- Light source : 120 channel, high-power LED arry (660 nm)
- Resolutions : 1,200, 2,000, 2,400, 3,000, 3,500*, 4000 dpi
- Repeatability : 5 microns (0.2 mil)
- Spot size : Variabel: 6.35 micros at 4,000 dpi; 21.17 microns at 1,200 dpi
- Exposure speed : Up to 14,508 sq.cm/min (2,248 sq.in./min) at 1,200 dpi
- Drum speed :270, 420 or 510 rpm
- Compatible RIPs : HQ-510PM, HQ-510PC,T-RIP600, Trueflow
- RIP interface : F-PIF
Weight
- Basic: 490 kg (1,078 lb.) Fully equipped: 520 kg (1,144 lb.)
- Operating Environment : 18-280C (64.4-82.40F),50-70% RH
- Down time: 15-330C (59.0-91.40F),30-80% RH
- Storage: 10-400C (50-1040F),10-80% RH
- Power requirements : Single phase 200-230 V 0,9 kw (including blower)
Options
- Punches : B1, A1, B2, A2 size internal punch blocks
- Stoesser (B1 tail-punch also available), Bacher, Bacher USA, Protocol, Screen,Grapho Metronik
- For punching : Imaging accelerator board
- Processor : LD-M1090 inline processor
- Take-up cassette : Take-up cassette to receive film, RC paper, or polyester CTP plate material
- Supply magazine : Second supply magazine
